Vertical Platform
Stairlift
Speed
0'15 m/s
Load capacity
Max. 385 kg
Maximum travel
3 mts
Vertical Platform Stairlift EXC-VH
Designed to overcome unevenness and stairs
Vertical platform lifts are one of the solutions available for people with reduced mobility to overcome architectural barriers in buildings and dwellings.
These products can be installed both indoors and outdoors, as they can be installed with enclosures that protect both people and the product from the weather.
The EXC-VH vertical platform lift has an efficient design, allowing you to have the product always ready for use, taking up as little space as possible without losing functionality and performance.
It also has optional accessories, a folding seat or a telephone for communication with the outside world.
The EXC-VH vertical platform stairlift is designed to enable people with reduced mobility to overcome architectural barriers in buildings.
This hydraulic platform stairlift can overcome differences in height of up to 3 metres on undifferentiated floors. It is available in 5 options: with two-metre door enclosure on both boardings, with 2-metre door enclosure on the lower boarding and 1.3-metre door on the upper boarding, with bellows, with lower safety tray and for outdoor use.
It has a load capacity of up to 385 kg and is always ready for use.
It has a load capacity of up to 385 kg and a speed of 0.10 m/s. The maximum number of stops is 2, covering a maximum distance of 3000mm for undifferentiated floors.
Consult our models available with or without enclosure, in the options without enclosure there is the option with a pit of 100 mm without bellows or 160 – 220 mm with bellows depending on the distance to be saved.
Some of the most notable features are: Single-phase power 230 V / 90º and 180º boarding / Wireless landing push button panel with keypad / Oven-baked paint in RAL 9016 and matt metallic grey / Manual swing door / Lower safety tray / Keypad on landing push button panel / Remote control / Hydraulic equipment with automatic heater.
- Automatic rescue in the event of a power failure.
- Electric security locks.
- Photocell.
- Integrated door.
- Non-slip floor.
- Emergency light.
- Alarm in case of entrapment.
- Load weigher with illuminated signal in cab.
- Parachute valve.
- With lower safety tray.
- With bellows.
- Large door at lower boarding / small door at upper boarding.
- Complete enclosure.
- Exterior with complete enclosure.
Our models
This model is used for travels not exceeding 1500 mm.
It incorporates a lower safety tray with obstacle detection to prevent entrapment or damage to any object, animal or person that may be located between the lower part of the platform lift and the platform lift pit.
It is the most economical version of the series of hydraulic vertical platform lifts, and also has the lowest pit height (100 mm).
This model is used for travels up to 2200 mm.
It has a bellows that limits access to the inside of the shaft and pit of the stairlift platform.
The bellows can be folded in such a way that it takes up the minimum of space and is integrated into the pit, thus achieving a reduced pit of 160 mm. for travels up to 1500 mm. and a pit of 220 mm. for longer travels.
Normally for strokes greater than 2,200 mm, and can be installed for shorter strokes under the supervision of our technical office.
Together with the stairlift platform, an aluminium enclosure will be installed, designed, manufactured and assembled in our facilities in Yeles, so that it can be fully coupled to the existing shaft and the requested stairlift platform, being fully integrated into the building.
As with the large door – small door model, it is designed to bridge travel distances of more than 2,200 metres.
In this case, as it has two large doors, it is designed for arcades or doorways that have wind doors and do not want to remove them.
This ensures that the premises are completely sealed off and that no one has the possibility to enter the building.
In this case, it can be installed with any stroke up to 3,000 mm.
Thanks to our self-supporting structure, it can be placed in any area without the need for the column where the guides for the movement of the stairlift platform are located to have a wall, as the structure will serve as such.
As they are installed outdoors, they have a canopy to prevent the entry of water and thus have the stairlift platform more protected and prolong its useful life. They also have ventilation grilles for continuous air regeneration inside.
Our Proyects
Want to see more products?
Download our catalogue and discover our customised accessibility solutions for homes and neighbourhood communities. We adapt to the needs and possibilities of each user and/or building.
